APS-30-S Akkuvarmennettu virtalähde 12VDC / 3A, tila 7Ah akulle, Satel
- nominal output voltage (according to IEC 38): 12 V DC
- output voltage stabilization
- battery status control and low battery disconnect system
- ability to work without a battery connected
- output current:
- operation with battery: 2,5 A / 2 A
- operation without battery: 3 A
- battery charging current: 0,5 A / 1 A (selectable)
- pins enabling configuration of the power supply settings
- 3 LEDs to indicate:
- AC mains power supply status
- battery status
- battery charging
- 2 OC outputs to indicate the following troubles:
- AC mains power loss
- low battery
- acoustic signaling of troubles
- electronic short-circuit protection of AC mains power supply circuit
- short-circuit protection fuse for battery charging circuit (T 3,15 A)
- electronic short-circuit and overload protection of the power output
- tamper protection against enclosure opening and removal from mounting surface
- Environmental class I
- Transformer supply voltage 230 V AC
- Enclosure dimensions 266 x 286 x 100 mm
- Board dimensions 140 x 99 mm
- Operating temperature range +5...+40 °C
- Battery failure voltage threshold (±10%) 11 V
- Battery cut-off voltage (±10%) 9,5 V
- Recommended battery 12 V / 7 Ah
- Weight without the battery 2,45 kg
- Battery charging current (switchable) 0,5 А / 1 А
- Nominal output voltage (according to IEC 38) 12 V DC
- Power supply type (according to EN50131) A
- Output current (operation without battery connected) 3 A
- Output current (operation with battery connected) 2,5 / 2 A
- Current consumption by power supply circuits 80 mA
- Electronics board supply voltage (from transformer) 17...24 V AC
- OC outputs (AWS, AWB) 50 mA / 12 V DC
Akku 12V/7Ah HPB7-12